Information
Categories

1958 Cadillac Power Brake Conversion Booster Master Cylinder

 
$703.77 - $763.77
SKU:
58PBKIT
Qty:
Proportioning Valve Set Up:
 
 
 

CADILLAC POWER BRAKE CONVERSION. KIT INCLUDES POWER BRAKE BOOSTER, MASTER CYLINDER, (PROPORTIONING VALVE OPTIONAL) AND FIREWALL BRACKET. A MUST WHEN UPGRADING TO DISC BRAKES.

 

 

Original Factory Booster has 800-1000 PSI

 

Booster we sell 1200-1400 PSI 

 

Electronic Booster 2200-2500 PSI

 

 

Ships on the average 3-5 business days from the date your order is placed.

 

Made in the USA

 

1958 CADILLAC POWER BRAKE CHANGOVER

ORIGINAL 58 CADILLAC POWER BRAKE UNIT

 

 

1.      Locate original power brake unit under hood mounted on the firewall.

2.      Remove bolt from pedal rod to the original Tredle Vac power brake booster push rod.

3.      Remove brake line and vacuum hose from booster.

4.      Remove four mounting bolts that attach Tredle Vac to bracket & remove booster.

5.      Clean mounting bracket and pedal assembly make sure area is free from any debris and restrictions so it does not to effect the operation of the pedal assembly. 

6.      Install new booster and master assembly so that the booster runs parallel to engine.

7.      Install bolts on mounting plate and keep loose so you can easily attach the pedal rod to the brake pedal assembly.

8.      Once pedal is attached tighten mounting bolts, install new vacuum hose from manifold to booster then install new brake lines to split brake system for the dual master cylinder. Using a good quality DOT3 or DOT4 brake fluid bleed the entire brake system. The larger reservoir on the master cylinder is for the front brakes. Test system for hydraulic or vacuum leaks before driving vehicle.

Search
0 Items
$0.00